If you're looking to make saw marks pop on your reclaimed wood project, but don't want to sand or add stain. Look no further. Here are 3 easy steps to finish wood with fire like a pro! This is one of my favorite ways to finish reclaimed wood, and I know you'll love it too!
Some tools I Recommend.
Affiliate links are posted for your convenience and by using these links it provides support for the site at NO COST TO YOU. By purchasing anything through the links (even other products not listed) You help support the production of more quality content.
This step is to remove all of the dirt and dust as well as soften the soft grain in the wood. This is where you wont eliminate the saw marks, but will still have a nice smooth surface.I recommend the Makita Brush Sander and/or anAngle Grinder with a Wire Wheel.
After you remove the heavy dust, its time to color the surface. For this I am using a MAP gas torch but a propane torch works just as well. Lightly go over the surface with the torch. Get close enough that the wood begins to color, but doesn't char. This is important. Charing will flake and create a cloudy and discolored surface. Follow the saw marks for maximum "pop"
This is the last step. Apply your finish with a sprayer. I use my Graco Ultra Cordless Airless Sprayer but any HVLP system will do. This keeps you from brushing the soot around, if there is any. It seals in the color without wiping it everywhere. It also allows you to keep your paint can clean. Most of us are lazy and tend to contaminate our cans with dirty brushes.
Thats a wrap! If you like this video please comment and share.
Check out my other reclaimed finish tutorial and video here!
Check out some of my reclaimed wood video projects HERE!!!
Want to try this build out for yourself? Download the digital plan now for step-by-step instructions, measurements, and a detailed look at how to punch this project in the face.