HOW TO MAKE A LEATHER CELL PHONE CASE
VIDEO BUILD. I make a leather cell phone case for use in my shop!
In this video I make a leather case/pouch for my cell phone! I get some help from local leather maker Ryan from Rustbelt Mercantile (Instagram.com/Rustbeltmerc)
Check out the video and walk through below!
Ryan made a list of the best tools for beginners to get started. Check it out!
Beginners Tool List
- Stitching Hole Spring Leather Punch
- Craftool Spacer Set
- Lacing-Stitching Pony
- Wing Divider
- Craftool Scratch Awl
- Poundo Boards
- Craftool Edge Bevelers
- Harness Needles 10/pk #4
- Economy Rotary Leather Punch
- Drill Burnisher
- Multi-Size Wood Slicker
- Waxed polycord
- Eco-Flo Gum Tragacanth
- Beeswax Block 1 oz
- Tandy Pure Neatsfoot Oil
- Obenauf’s LP Boot Preservative 8 oz
- Tanners Bond Contact Cement
Affiliate links are posted for your convenience and by using these links it provides support for the site at NO COST TO YOU. By purchasing anything through the links (even other products not listed) You help support the production of more quality content.
Pick your section of hide. Layout your selected area with a straight edge and cut your section using a brand new razor blade.
Center and punch the hole for the bottom of the case. Layout template for the curve on the top of the case, and cut with a sharp knife. Bevel the edge with your edge beveler.
Apply Eco-Flo Gum Tragacanth to edge of bevelled curve. Burnish on the drill press.
Use corner tool to taper base of the case. Then mark lines for the thread holes. Pre mark, and stamp the holes for the belt loop on both the front and loop flap. Then saddle stitch together
Repeat process for edge stitching. Mark holes, punch, and saddle stitch sides together.
Use the sander to flush edges. Add bee’s wax and burnish. You’re done!
If you loved this plan please share and leave a comment!
Please share and comment below with any questions about this product.